Kleiderschrank Breite 160 Cm

A 63 in (1600 mm) wide wardrobe(5 ft 3 in / 160 cm) is a medium-sized storage unit designed to fit precise 5.25 ft (1.6 m) alcoves or wall spaces, making it a popular base for custom sliding door systems. In furniture design, this width is a standard size that conveniently divides into two 31-1/2 in (80 cm) cabinet bays. For DIYers, it offers the ideal balance of generous storage space and a compact footprint that won't overpower the room.

Sizing, Dimensions, and Room Planning

Before assembly begins, measure your room placement carefully. Awardrobe closetwith a width of 63 in (1600 mm) requires clear floor space for installation as well as adequate clearance for daily use.

The standard depth for wardrobes is 23-5/8 in (60 cm). This depth is essential so clothes hangers hang straight on the closet rod without hitting the back panel or front doors. When planningsliding wardrobe doors, remember to factor in the extra depth needed for the track system. A dual-running sliding door track typically requires 3-1/8 in to 4 in (8 cm to 10 cm) of mounting depth. In this setup, the cabinet carcass itself should have an internal depth of around 19-11/16 in to 20-1/2 in (50 cm to 52 cm) to achieve an overall depth of 23-5/8 in (60 cm).

Designing the interior layout of a 63 in (160 cm) wide wardrobe is like playing a game of Tetris with wood panels—every cubic inch needs to be planned with the right shelf size or drawer insert to eliminate wasted space.

Solutions for Small and Challenging Spaces

In urban apartments,space saving wardrobes for small roomsare essential. Sliding doors excel here: because no cabinet doors swing out into the room, your bed or an adjacent31-1/2 in (80 cm) wide sideboardcan sit as close as 19-11/16 in (50 cm) from the wardrobe front.

For rooms with sloped ceilings or low clearance (such as basements or attics), awardrobe low heightdesign is often required. While standard sliding door systems like2x Sliding Wardrobe Doors - H: up to 2500mm W: 1600mm - Mirrorcater to ceiling heights up to 98-7/16 in (2500 mm), melamine-facedparticle boardorMDFcabinet bodies can easily be trimmed down to custom heights.

Interior Hardware: Drawers and Slide Systems

A 63 in (1600 mm) wardrobe is typically split into two 31-1/2 in (80 cm) wide bays—a perfect size for installing internal drawers. For woodworkers and DIY builders, selecting the right drawer slide technology is key.

• Partial-extension slides:The drawer extends to roughly 75% of its length, leaving the rear section tucked inside the cabinet. While budget-friendly, this is often impractical for daily use in deep wardrobes.
• Full-extension slides:The drawer extends out 100%. This is highly recommended for cabinet depths of 19-11/16 in to 23-5/8 in (50 cm to 60 cm) so you can easily reach socks and undergarments at the back.

Drawer slides mount to side panels using the standardSystem 32(32 mm center-to-center hole spacing). High-quality builds typically useball-bearing drawer slidesor concealedundermount drawer slides. Typical slide lengths for wardrobes range from 17-11/16 in to 21-5/8 in (450 mm to 550 mm).

For custom, heavy-duty builds—such as walk-in room dividers or deep platform closets built deep into a space—cabinetmakers turn to specialty hardware. Extra-longfull-extension slides 63 in (1600 mm)or heavy-duty1600 mm drawer slidesallow entire pull-out pantry-style wardrobe towers to glide smoothly out of an alcove. For these demanding setups, aheavy-duty full-extension slide 1600 mmwith a load rating of 176 lbs to 264 lbs (80 kg to 120 kg) is mandatory, as the combined weight of timber and clothing places immense leverage forces on the runners.

Hinges and Soft-Close Dampening Technology

If you prefer classic swinging doors or a hybrid layout over continuous sliding tracks, choosing the rightwardrobe hinges(cabinet hinges) becomes critical.

For cabinet carcasses made from 3/4 in (18 mm) particle board, concealedEuropean cup hingesare the standard choice. The hinge cup hole drilled into the door panel is typically1-3/8 in (35 mm)in diameter. During installation, select the correct hinge overlay type:

• Full overlay:The door fully covers the cabinet side wall edge.
• Half overlay (dual overlay):Two adjacent doors share a single partition wall (e.g., three doors spanning a 63 in / 160 cm wardrobe).
• Inset:The door sits flush inside the cabinet opening, exposing the side frame edge.

Modernwardrobe door hingesfeature built-in soft-close dampening mechanism. Thesewardrobe soft close hingescatch the door at around a 30° angle, pulling it closed quietly and smoothly. Essential tip for DIY installers:Soft-closemechanisms must not be confused withpush-to-open(touch release) hardware. Push-to-open latches bounce handle-free doors open when pressed. The two systems work against each other mechanically and cannot be combined on the same hinge. Handleless fronts require special un-sprung hinges paired with push latches.

Installing Sliding Doors: Hardware and Tools

Installingmade-to-measure sliding wardrobe doorsdemands precision, but with the right tools, it is a manageable 3 to 4-hour DIY project.

Tools required:

• Cordless drill/driver with bits (typicallyPZ2orTorx TX20driver bits for wood screws)
• Bubble level or torpedo level (at least 39 in / 100 cm long)
• Tape measure and pencil
• Rubber mallet

Step-by-Step Installation

1. Mount the bottom track:The lower track carries the main weight of the doors. Screw it down completely parallel to the front edge of the cabinet base. On hard flooring surfaces (tile, laminate), heavy-duty adhesive tape or mounting glue can also be used.
2. Mount the top guide rail:The upper track keeps the doors aligned. Use a level to ensure it sits plumb directly above the bottom track. An alignment offset of even 1/16 in (2 mm) can cause sliding doors to bind or roll open on their own.
3. Adjust the roller runners:Bottom-running roller wheels (often featuring ball bearings) screw onto the back of the door panels. Quality track hardware features height adjustment screws (hex key or Phillips head) to adjust door height by +/- 3/16 in (+/- 5 mm), compensating for uneven floors or walls.
4. Install soft-close dampers:Forsoft close wardrobe doors, slide dedicated soft-close damper units into the top track position. An actuator pin mounted to the door panel catches the damper when closing. The mechanism catches the door and gently pulls it the final 2 in to 4 in (50 mm to 100 mm) flush against the side jamb.

Materials and Interior Style

Beyond functional hardware, door finish dictates the visual tone of your space. Ablack wardrobecabinet body offers a sleek, bold modern design. Pairing dark frames with mirrored fronts, like the2x Sliding Wardrobe Doors - H: up to 2500mm W: 1600mm - Mirror, lightens the visual weight. Mirrors bounce natural light around the room, making narrow hallways or small bedrooms feel noticeably larger.

Door panels are typically constructed with rigid aluminum frame profiles framing mirror glass or engineered wood paneling. Aluminum framing prevents tall door fronts from warping—a common structural issue on panels reaching heights up to 98-7/16 in (2500 mm).

Compatibility with Modular Systems

Many homeowners combine ready-made cabinet frames with custom hardware or door fronts. Popular modular setups like theIKEA Pax Wardroberely on precise hole patterns. When retrofitting interior drawer slides or cabinet hinges, check hole spacing carefully. System 32 is the industry standard, but front setback distances (often 1-7/16 in / 37 mm) can vary. Measure existing drawer slide hole patterns carefully before ordering replacement slides.

If 63 in (1600 mm) isn't the ideal width for your room layout, you can easily scale up or down. For narrower alcoves, check out our47 in (1200 mm) wardrobe options. For larger bedrooms, consider wider choices like71 in (1800 mm) wardrobesor full wall-to-wall94 in (2400 mm) wardrobe solutions.

FAQ – Frequently Asked Questions about 63 in (1600 mm) Wardrobes

Which hinges do I need for standard wardrobe closet doors?

For standard wooden doors on a 63 in (160 cm) wide wardrobe, use 1-3/8 in (35 mm) cup concealed European hinges. Look for an opening angle of 95° to 110°. Make sure to select the correct overlay style for your frame layout (full overlay, half overlay, or inset).

Can I install heavy-duty drawer slides in a wardrobe cabinet?

Yes. If you are building extra-deep drawers or pull-out storage towers, you can install1600 mm heavy-duty drawer slides. However, the cabinet frame must be securely anchored to wall studs, as extending heavy drawers shifts the center of gravity forward, creating a tipping hazard.

What is the difference between soft-close and push-to-open hardware?

Soft-close hardware catches closing doors or drawers and pulls them quietly shut. Push-to-open (touch release) hardware is designed for handleless fronts, popping the door open slightly when pressed. The two mechanisms are mechanically incompatible and cannot be combined on the same hinge system.

How much clearance space is needed in front of the wardrobe?

For wardrobes with sliding doors, a clearance of 20 in to 24 in (50 cm to 60 cm) is plenty to stand comfortably in front. For traditional swinging doors, calculate the width of the door panel (on a 63 in / 160 cm cabinet, usually four 15-3/4 in / 40 cm doors or two 31-1/2 in / 80 cm doors) plus at least 16 in (40 cm) of walking clearance.

What material is used for wardrobe back panels?

Back panels are typically made from 1/8 in (3 mm) high-density fiberboard (HDF) sheets. They slide into routed side channels or screw/nail directly into the rear frame. The back panel is essential for structural stability and squareness (preventing racking), so it must never be omitted during assembly.