Sale

Sale is the clearance category of furnica.com: furniture hardware from the regular range in packs, finishes or sizes that are being phased out, overstocked or replaced by a newer version – wood dowels, shelf supports, screw cover caps, lid stays, cabinet knobs and bar pulls, drawer lock keys, wall anchors and the occasional tool or storage system. The products are new and unused; what changes is only their place in the catalogue. For a one-off project – a bookcase, a garage cabinet, a repair – this is often the first place to look for small parts in useful quantities.

What you will typically find here

• Joinery and assembly parts – wood dowels 5/16 x 1-3/8 inch (8 x 35 mm), 100 pcs for glued panel joints, universal wall anchors 6 x 35 mm and 6 x 25 mm anchors for fixing cabinets to the wall.
• Shelf hardware – plastic shelf supports 3/16 inch (5 mm), 20 pcs, glass shelf brackets 5 mm and the shelf support connector bracket 1 inch (25 mm) in chrome.
• Handles and finishing – a porcelain cabinet knob, the matte black bar pull with 5-1/16 inch (128 mm) hole spacing and screw cover caps for Phillips screws, 100 pack.
• Movement and locking – the scissor lid support hinge for chest and bench lids, the replacement key for 19 x 16 mm drawer locks (keyed alike) and a pull-out wire basket drawer on H45 full-extension slides.
• Storage systems and tools – items such as the Elfa door and wall basket system or a DeWalt material clamp appear here when a single line is cleared.

How to use the Sale category sensibly

1. Check the specification, not only the name. A 5 mm shelf support fits a 5 mm hole; a 3 mm support does not. The same applies to hole spacing on handles (128 mm = 5-1/16 inch) and to dowel diameters (8 mm needs an 8 mm drill).
2. Buy the full quantity you need at once. Clearance lines are not restocked, so a second pack in the same finish may not be available later.
3. Match the finish to the rest of the project. Chrome, matte black and brushed nickel look different next to each other; the regular categories list every finish if a sale item does not match.
4. Think in systems. A clearance lid stay is only useful with the right hinges, a basket drawer needs 1 inch of side clearance – the product page lists the companion parts.

Where to find the regular range

If the part you need is not in the Sale category, the main collections cover it in full: biscuits and dowels, brackets and fittings, glass shelf supports, cabinet knobs, cabinet pull handles, drawer locks, felt pads for furniture, cabinet door bumpers and pull-out storage baskets. The complete catalogue is grouped under furniture accessories.

Frequently asked questions

Are Sale products second-hand or damaged?

No. They are new items from the regular range; the category exists for discontinued finishes, pack sizes and overstock.

Will a Sale item be restocked?

Usually not. When a line sells out it disappears from the category; the successor product is listed in the regular collection.

Can Sale hardware be mixed with the regular range?

Yes – the parts follow the same standards (32 mm hole system, 5 mm shelf pins, 128 mm handle spacing), so they combine with everything else in the catalogue.