Kleiderschrank Breite 120 Cm

0 products

No products found
Use fewer filters or remove all

Related categories

Furniture and components measuring 47-1/4 in (1200 mm)represent a key planning dimension in modern cabinet making and interior fit-outs. DIYers and installers encounter this specification in two completely different yet equally demanding applications: as a compact cabinet carcass width (47-1/4 in / 120 cm) for space-saving wardrobes and wide kitchen drawers, and as an extreme extension length for heavy-duty slides in vehicle builds and workshop setups.

This guide breaks down the technical requirements for projects built around the nominal dimension of 47-1/4 in (1200 mm). It delivers expert insights into wardrobe space planning, structural load calculations for slide systems, and proper installation techniques for every component.

The 47-1/4 in (1200 mm) Cabinet Carcass: Compact Space Solution

A wardrobe with an exact total width of 47-1/4 in (1200 mm) is the classic choice for alcoves, narrow hallways, guest rooms, or studio apartments. At this width, the interior is typically divided into two compartments of just under 23-5/8 in (600 mm) each (minus the thickness of the center partition wall).

Space Requirements and Visual Impact

When planning cabinets made fromparticle boardorMDF(medium-density fiberboard), depth plays a crucial role. A standard wardrobe requires an internal depth of at least 21-5/8 in (55 cm) so clothes hangers on thecloset roddon't rub against the doors. Factoring in the back panel and door fronts, this yields an overall external depth of nearly 23-5/8 in (60 cm).

If space is too tight for outward-swinging hinged doors, usingsliding wardrobe doorsis the most practical solution. For a wardrobe width of 47-1/4 in (1200 mm), the front features two door panels, each slightly wider than 23-5/8 in (600 mm) to create a center overlap of roughly 3/4 in to 1-3/16 in (20 mm to 30 mm). This overlap keeps dust from entering the cabinet interior.

If space expands or storage needs grow down the road, the 47-1/4 in (1200 mm) layout often serves as a base module. Many DIYers combine these cabinets with wider units from our63 in (1600 mm) Wardrobesor70-7/8 in (1800 mm) Wardrobescollections to build a seamless wall-to-wall storage unit. For extra-large spaces, full-size setups like94-1/2 in (2400 mm) Wardrobesare the ultimate choice.

Heavy-Duty Drawer Slides 47-1/4 in (1200 mm): Hardware for Extreme Loads

While 47-1/4 in (1200 mm) is considered a compact width in wardrobe building, this dimension sits at the absolute top end of the spectrum for furniture hardware. A47-1/4 in (1200 mm) drawer slideis rarely installed in standard residential furniture; instead, it is primarily used in workbenches, industrial rack systems, and especially camper van conversions (rear slide-out trays).

Full-Extension vs. Partial-Extension Slides at Extreme Lengths

When building with a47-1/4 in (1200 mm) slide, choosing afull-extension slideis essential. Afull-extension 47-1/4 in (1200 mm) slideallows the drawer or tray to pull out 100 percent from the cabinet frame. The extension travel is exactly 47-1/4 in (1200 mm), giving you complete top-down access to the full depth of the compartment. A partial-extension slide at this length would leave roughly 11-13/16 in (300 mm) hidden inside the cabinet—creating a blind spot that severely degrades usability.

Load Capacity and Leverage Forces

Standard kitchen drawer slides range from 9-7/8 in to 23-5/8 in (250 mm – 600 mm) in length and carry about 66 lbs (30 kg). Aheavy-duty full-extension 47-1/4 in (1200 mm) slidemust handle entirely different mechanical forces. When a 3.9 ft (1.2 m) drawer is fully extended, it exerts immense leverage on the cabinet mounting points.

That is why heavy-dutyball-bearing slidesengineered from thick-gauge zinc-plated steel are required in this segment. Specifications depend directly on the application:

  • 47-1/4 in (1200 mm) 220 lbs (100 kg) heavy-duty slide:Sufficient for light tool drawers or pantry pull-outs.
  • 47-1/4 in (1200 mm) 440 lbs (200 kg) or 550 lbs (250 kg) heavy-duty slide:Essential for carrying heavy cargo, batteries, or water tanks in camper van builds.

Important planning tip:Rated load capacities (e.g., 440 lbs / 200 kg) typically apply to static loads when evenly distributed in the retracted position. Under dynamic loads (vibration and bumps while driving a camper van), the effective load rating of47-1/4 in (1200 mm) drawer slidesdecreases. Always factor in a safety margin of 30 to 40 percent.

Locking Mechanisms and Mounting Options

For mobile applications like acamper van 47-1/4 in (1200 mm) heavy-duty slide, a mechanical lock is indispensable. Afull-extension 47-1/4 in (1200 mm) slide with lock(lock-in / lock-out) features a front release lever. This locks the47-1/4 in (1200 mm) telescopic slidewhen fully closed (preventing drawers from sliding open on tight turns) and when fully extended (preventing rear slide-outs from slamming shut on uneven terrain).

When it comes to installation, contractors distinguish between standard side mounting andbottom mounting(flat mounting). Abottom-mount 47-1/4 in (1200 mm) heavy-duty slide(orbottom-mount 47-1/4 in (1200 mm) full-extension slide) mounts flat to the vehicle or cabinet floor rather than side walls. Note: Flat bottom-mounting drastically reduces the manufacturer's load rating (often by up to 75 percent) because forces act on profile bending rather than shear strength. Alternatively, specialized L-brackets are used to mount the slides vertically to the floor while preserving full load capacity.

Wide Kitchen Drawers: Utilizing a 47-1/4 in (1200 mm) Cabinet Width

Beyond vehicle builds, the 47-1/4 in (1200 mm) dimension is widely used in modern kitchen planning. Extra-wide base cabinets (47-1/4 in / 120 cm) are trending because they create a clean, streamlined aesthetic.

For DIYers, however, this introduces specific challenges with interior organization. A47-1/4 in (1200 mm) cutlery tray insertmust precisely match the clear internal width of the drawer box. Since the exterior cabinet width is 47-1/4 in (1200 mm), subtract twice the side wall thickness (typically 5/8 in or 3/4 in / 16 mm or 19 mm). This leaves a clear internal width of roughly 45-3/4 in to 46 in (1162 mm to 1168 mm). Trimmable cutlery trays featuring trim profiles that cut cleanly with a utility knife are the ideal choice here.

Front hardware also demands careful consideration. A black aluminum47-1/4 in (1200 mm) edge-pull handlespanning the entire width of the drawer prevents wide fronts from warping when pulled from one side. It evenly distributes pulling forces across both47-1/4 in (1200 mm) drawer slides.

Practical Installation and Recommended Tools

Whether installing cabinet carcasses or heavy-duty drawer systems, precise mounting dictates long-term durability. An unanchored cabinet carcass acts like a house of cards during assembly—only when the back panel is nailed or screwed perfectly square does the entire structure gain its structural rigidity.

Tools for Your 47-1/4 in (1200 mm) Project

You will need the following standard tools for assembly:

  • Cordless drill/driver with precise torque control.
  • Bit sets: Must match screw drives exactly. When drivingwood/particle board screws, use eitherPZ (Pozidriv)orTX (Torx). Torx drives transfer torque without slipping or camming out, which is crucial when driving into dense composite materials.
  • Spirit level (at least 31-1/2 in / 80 cm, ideally 39-3/8 in / 100 cm long).
  • Tape measure/folding ruler and try square.

Installing Sliding Doors on a 47-1/4 in (1200 mm) Cabinet

When fittingcustom sliding wardrobe doorsinto a 47-1/4 in (120 cm) cabinet carcass, installation follows three steps:

  1. Mount the track channels:Fasten the top guide track (usually a U-channel) flush against the cabinet top. Mount the bottom running track onto the cabinet floor. Ensure correct depth alignment so doors hang perfectly plumb.
  2. Insert door rollers:Angle doors into the top track first, then lower them onto the bottom track.
  3. Fine adjustment:Use the adjustment screws on the bottom roller hardware (typically adjusted with an Allen wrench or Phillips screwdriver) to raise or lower the door precisely until it seals flush and parallel against the outer cabinet edge.

Aligning Heavy-Duty Drawer Slides

Installing heavy-duty47-1/4 in (1200 mm) drawer slidesleaves zero room for error. If the slides are 47-1/4 in (1200 mm) apart at the front and 47-3/8 in (1203 mm) at the back, the system will bind when extended. Use scrap wood spacer blocks to maintain identical spacing between side walls across the full 3.9 ft (1.2 m) depth. Fasten slides securely using properly sized wood screws (e.g., #8 or #10 / Ø 4 mm or 5 mm, matching the hole pattern) and always utilize all specified mounting holes to safely transfer shear loads to the cabinet structure.

Featured Products for Your 47-1/4 in (1200 mm) Project

We offer precision-fit door solutions designed for 47-1/4 in (120 cm) wide cabinet builds. These ready-to-assemble systems save DIYers from complex cutting and hardware routing.

Frequently Asked Questions (FAQ)

What is the minimum depth required for a sliding door wardrobe?

For a sliding door wardrobe, plan for an overall external depth of at least 23-5/8 in (60 cm), preferably 25-9/16 in (65 cm). The sliding door track mechanism (two bypass tracks) consumes about 3-1/8 in to 3-15/16 in (8 cm to 10 cm) of internal depth. If clear interior depth falls below 19-11/16 in (50 cm), clothes hangers will catch on the inner door panel.

What is the difference between partial-extension and full-extension 47-1/4 in (1200 mm) drawer slides?

Afull-extension slideextends out to its entire installed length (here 47-1/4 in / 1200 mm). The drawer box rests entirely outside the cabinet. In contrast, a partial-extension slide only extends about 70 to 80 percent of its depth. At a 3.9 ft (1.2 m) slide length, full extension is highly recommended to comfortably reach the back of the drawer.

Can 47-1/4 in (1200 mm) heavy-duty slides be installed flat (bottom-mounted)?

Yes, but with major limitations. Mounting standard ball-bearing slides flat on the floor reduces their load capacity by up to 75 percent. For true full-capacitybottom mounting, you must either use heavy-duty L-mounting brackets or select drawer slides explicitly rated by the manufacturer for flat bottom mounting.

Do I need locking slides for a camper van rear slide-out tray?

Yes. Afull-extension 47-1/4 in (1200 mm) locking drawer slideis essential in camper builds. The locking feature (lock-in / lock-out) keeps the tray securely closed while driving (preventing accidental opening during acceleration or turns) and holds it locked open so heavy trays don't slam shut on uneven ground and cause injuries.

Is a 47-1/4 in (1200 mm) wide wardrobe suitable for two people?

A 47-1/4 in (120 cm) wide cabinet offers roughly 47-1/4 linear inches (1.2 linear meters) of hanging rod space along with a few shelves. While adequate for one person, it is usually too small for two. For shared storage, consider sizes starting from63 in (1600 mm) widthand up.

Related Categories for Your Furniture Projects

If the 47-1/4 in (1200 mm) dimension isn't quite right for your build or you wish to expand your layout, explore these related categories for matching hardware: