Küchenzeile Ohne Geräte

0 products

No products found
Use fewer filters or remove all

Related categories

A kitchen cabinet set without appliancesis a modular furniture kit consisting of base and wall cabinets along with a continuous countertop, designed so that openings for the stove, oven, dishwasher, and refrigerator can be fitted on-site with your own electrical appliances.

For DIYers and home assemblers, afitted kitchen without appliancesoffers maximum control over both your budget and technical features. Existing appliances are often still fully functional, or you may want to install specific brand models not offered in complete turnkey kitchen packages. In this guide, you will learn how to plan akitchen block without appliances, which dimensions are crucial, and what to keep in mind when assembling the cabinet box components.

Planning and Space Layout

The foundation of anymodular kitchen without appliancesis accurate measurement. Since the cabinets are delivered as standalone modules, you have complete freedom in arranging thekitchen run base cabinets. The only fixed points are the water and electrical connections on the wall.

Lengths and Module Sizes

Standardized widths simplify planning. A78-3/4 in (200 cm) kitchen cabinet setis ideal for compact spaces and offers room for a sink, stove, and work surface. If you need more storage space, choose a102-3/8 in (260 cm) kitchen cabinet set. Intermediate sizes such as a70-7/8 in (180 cm) kitchen setor an82-11/16 in (210 cm) kitchen setcan also be configured by adding or omitting individual cabinet boxes. For very tight spaces or office breakrooms, asmall kitchen cabinet setor even amini kitchen kitchenetteis the most practical solution.

Appliance Openings in the Kitchen Run

Planning base cabinets is like a game of Tetris, where23-5/8 in (60 cm)wide openings for major appliances must be placed precisely between drawer modules. A standard built-in oven range or under-counter dishwasher requires an exact width of23-5/8 in (60 cm). The overallkitchen cabinet heightis defined by the adjustable leg levelers. Typically, the counter height ranges from33-1/2 in to 33-7/8 in (85 cm to 86 cm). Left and right boundaries for freestanding appliances are formed by adjacent cabinets. If a separateappliance tall cabinetor pantry unit for a refrigerator is needed, its dimensions (usually also23-5/8 in (60 cm)wide) must be factored into the total length.

Materials, Finishes, and Construction

In modern furniture manufacturing, cabinet box panels and door fronts are standardly made from melamine-coatedparticleboard. This material is moisture-resistant, easy to clean, and dimensionally stable. Edges are frequently finished withABS edgebandingto prevent water penetration during floor cleaning.

Visually, these modular kits cover a range of popular styles:

  • Wood Finishes:Awood-finish kitchen setfeaturing finishes likeWotan OakorSonoma Oakbrings visual warmth into the room. The surface grain closely mimics natural timber.
  • Matte Solid Colors:Muted shades are frequently chosen formodern kitchen runs. Agray kitchen cabinet setor door fronts inMatte CharcoalorMatte Whiteconceal fingerprints far better than high-gloss surfaces while offering a timeless look.

Assembly: Tools and Process for DIYers

Assembling akitchen set without appliancesrequires a systematic approach. Cabinet box components are assembled lying flat on the floor and then aligned against the wall.

Required Tools

  • Cordless screwdriverwith bit set (crucial:PZ2bit for particleboard screws)
  • Spirit level(at least31-1/2 in (80 cm)long)
  • Jigsawwith a fine-toothed wood blade for countertop cutouts
  • Tape measureand framing square
  • Hammer drill for mounting upper wall cabinets

Aligning the Base Cabinets

Always start at the highest point of the floor. Align the first base cabinet perfectly level and plumb using thespirit level. Position all subsequent cabinets next to it and adjust them to the exact same height using the adjustable leg levelers. Connect the cabinet boxes together using specialized cabinet connectors (typically requiring a3/16 in (5 mm)bore hole) so the front panels form a seamless, continuous alignment.

Cutting the Countertop

When purchasing akitchen set without appliances, the countertop is supplied in one continuous piece without pre-cut openings. This gives you full flexibility to position the sink and cooktop wherever your wall plumbing and electrical hookups are located. Mark the outlines of your appliances on the underside of the countertop. Pre-drill the four corners using a3/8 in (10 mm)wood drill bit to insert thejigsawblade. Crucial: Always seal the raw cut edges of theparticleboardwith clear silicone before installing the sink or cooktop to prevent the countertop from swelling due to water exposure.

Adjusting Hinges and Fronts

Cabinet doors are attached to the box usingconcealed cup hinges(bore hole Ø1-3/8 in (35 mm)). After installing the cabinet boxes, doors often hang unevenly. Using the adjustment screws on the hinge arm, you can adjust the fronts in three dimensions (height, depth, and side reveal) until achieving uniform reveal gaps (approx.1/16 in to 1/8 in (2 mm to 3 mm)gap width).

Featured Modular Series for DIY Assembly

The various series differ in overall length, total cabinet count, and color finish options. Here is a selection of proven configurations for your renovation project:

GONZO Series – Compact 78-3/4 in (200 cm) Kitchen Blocks

This series includes 6 cabinets and is ideal for straight wall setups where space is tight. A continuous countertop is included.

RENO Series – Spacious 102-3/8 in (260 cm) Kitchen Runs

With 8 individual cabinets, the RENO series offers significantly more storage space, particularly with additionaldrawers under the countertopfor cutlery and cooking utensils.

FAQ – Frequently Asked Questions on Assembly and Planning

How much does a kitchen set without appliances cost?

The raw material cost for the wood components depends heavily on the overall width of the kitchen run and the type of cabinets chosen. Simple swing-door cabinets are less expensive to produce than complex drawer base modules with full-extension slides. Since costly electronics (appliances) are excluded, your investment goes strictly toward the cabinet boxes, door fronts, hardware fittings, and countertop.

Will my existing appliances fit in the openings?

Yes, standard cutout openings for built-in appliances follow the standard width of23-5/8 in (60 cm). Under-counter appliances such as dishwashers fit cleanly beneath the countertop when set to aheight of at least 32-1/4 in (82 cm)(preferably33-1/2 in (85 cm)). Freestanding refrigerators can simply be positioned at the end of the cabinet line.

How is the countertop delivered?

The countertop is delivered as one continuous piece without pre-drilled holes or cutouts. This is necessary because the position of the sink and stove vary depending on your room's wall plumbing and electrical hookups. The installer cuts the openings on-site using a jigsaw.

Can I change the order of the cabinets?

Because this is amodular kitchen without appliances, individual base and wall cabinets are completely independent of one another. You can position the sink base cabinet on the left, right, or center—provided the overall length of the countertop allows for it and your wall connections support that layout.

Related Categories

Frequently Asked Questions

Will my existing built-in appliances fit into this kitchen cabinet set?

Yes, the cabinet openings are standardized for common built-in appliances with a typical width of 23-5/8 in (60 cm). Standard openings accommodate standard ovens and dishwashers. Included hinges are compatible with Nobilia or fit IKEA Faktum fronts if you plan to adapt them. Be sure to check your specific appliance dimensions.

Can I replace the hinges and drawer slides with other hardware systems later?

Yes, swapping hardware is easy. Our kitchen cabinet sets utilize the standard System 32 hole pattern. You can retrofit hardware with a 1-3/8 in (35 mm) cup diameter and 1-1/4 in (32 mm) hole spacing at any time. These make an ideal alternative to Blum or replacement for Hettich, provided hole spacings match.

Does the countertop come pre-cut for the sink and cooktop?

No, the countertop is supplied solid without cutouts, giving you complete flexibility when positioning your appliances. You can make cutouts on-site based on your specific appliance dimensions. The construction is suitable for Nolte or compatible with Alno standard sinks when considering standard 23-5/8 in (60 cm) depth dimensions.

Can this kitchen cabinet set be expanded with additional cabinets later?

Yes, you can expand the modular run at any time. The cabinet boxes are built on standard width increments: 11-13/16 in, 15-3/4 in, 23-5/8 in, and 31-1/2 in (30, 40, 60, and 80 cm). You can add our modular cabinets, which are also compatible with IKEA Utrusta interior organizers or fit Pelipal systems, provided interior measurements and System 32 grids match.

Are all holes pre-drilled for DIY assembly?

Yes, all essential assembly holes are pre-drilled at the factory. The System 32 pattern ensures precise alignment of shelves and concealed hinges. If using your own hardware as a replacement for Häfele or alternative to Grass, verify the 1-1/4 in (32 mm) hole grid pattern beforehand for smooth installation.