Küchenzeile 180 Cm

0 products

No products found
Use fewer filters or remove all

A 71 in (180 cm) kitchenette is a compact, modular cabinet ensemble for food preparation that occupies exactly 71 inches (1.80 meters) of wall space.This dimension is based on the classic kitchen grid, which is typically constructed in increments of 12 in, 16 in, 20 in, or 24 in (30 cm, 40 cm, 50 cm, or 60 cm). With a total width of 71 in (180 cm), exactly three standard 24 in (60 cm) built-in modules can be combined—for example, a sink base cabinet, a range unit, and an additional base cabinet for storage space or an under-counter refrigerator.

For DIYers and builders, assembling such asmall kitchenetteis a manageable project that can be completed over a weekend using standard tools. Planning a 71 in (180 cm) wide kitchen is like packing a hiking backpack—every cubic inch must serve a clear purpose to prevent clutter and maintain ergonomic cooking workflow.

Applications and Layout Planning

A71 in (180 cm) kitchen blockis the classic solution for limited living space. Its dimensions are tailored precisely to the requirements of studio apartments, dorm rooms, vacation homes, or office breakrooms. Used as amini kitchenettein a mother-in-law suite, this format provides sufficient countertop space and storage for a one- to two-person household.

When planning your layout, you must account for depth and utility connections alongside the overall 71 in (180 cm) width. Standard countertop depth is 24 in (60 cm). However,kitchenette base cabinetsare typically only 18 in to 20 in (45 cm to 50 cm) deep. This rear setback is structurally necessary: it creates a utility gap for plumbing lines, drain pipes, and electrical cables for the stove connection without requiring you to cut out cabinet back panels.

If your room is exactly 71 in (1.80 m) wide, the kitchenette fits seamlessly from wall to wall. However, if a narrow gap remains—for instance, with a recess width of 73 in (185 cm)—DIYers often ask how to bridge the opening. The professional solution is a filler strip. This piece of front trim is cut precisely to the gap dimension and screwed to the outer cabinet carcass using a bracket, preventing dirt and moisture from falling between the cabinet and wall.

Configuration: With or Without Wall Cabinets?

A classic71 in (180 cm) fitted kitchenconsists of a upper and lower row of cabinets. Modern room concepts, however, often break away from this standard setup.

Akitchenette without wall cabinetsfeels significantly airier in small, narrow rooms and keeps the space from looking visually overwhelmed. This open-concept design works especially well when walls are equipped with open shelves mounted on visible shelf brackets (32 mm system), or when wall construction (e.g., standard unreinforced drywall) cannot safely support the weight of loaded upper cabinets. Looking for akitchenette without upper cabinetsor akitchenette without tall pantry cabinetsfollows this same minimalist approach.

Forgoing wall cabinets requires maximizing lower storage. This brings thekitchenette with drawersinto focus. Compared to traditional hinged doors, drawer slide systems offer major ergonomic advantages by bringing the entire contents out to meet the user. When selecting drawer slide hardware for your lower kitchen cabinets, DIYers typically encounter two systems:

  • Roller Runners:A basic system utilizing nylon rollers. Usually designed as a single-extension slide, allowing the drawer to extend roughly 75%. Weight capacities typically range from 33 lbs to 44 lbs (15 kg to 20 kg).
  • Ball-Bearing / Undermount Slides:These feature ball-bearing telescopic slides, frequently designed as full-extension runs (100% travel). They easily support 66 lbs to 88 lbs (30 kg to 40 kg), which is essential for heavy cookware and stacked dinnerware. Integrated dampers (soft-close hinges and slides) prevent harsh slamming.

Appliance Integration and Cutouts

Another central consideration is appliance selection. Many DIYers intentionally choose akitchenette without appliancesto reuse existing kitchen electronics or purchase specific brand-name models separately.

Configurations like akitchenette without a refrigeratoror akitchenette with appliances except refrigeratorare particularly common. The reason: in many homes, a standalone retro fridge or a full-size refrigerator-freezer combo is placed elsewhere in the room. This frees up valuable real estate within the 71 in (180 cm) footprint for a dishwasher, oven, and additional base cabinets.

Assembly and Installation: A DIY Guide

Building a71 in (180 cm) kitchenetterequires a systematic approach. Cabinet carcasses (the main box structures) are typically constructed from 5/8 in (16 mm) melamine-faced particle board. Panel joinery relies on wood dowels (typically 5/16 in / 8 mm) andcam lock fasteners(Minifix systems). The latter allow you to lock cabinets together square and sturdy using a standard PZ2 or PZ3 screwdriver.

1. Aligning Base Cabinets

The most critical step in installation is leveling the base cabinets precisely. Kitchen floors are rarely perfectly level, which is why cabinets rest on height-adjustablecabinet legs(plinth feet). These heavy-duty plastic legs are threaded, offering continuous adjustment typically from 4 in to 6 in (100 mm to 150 mm). This allows you to compensate for sloped floors and customize the overallkitchenette heightto the user's ergonomics. Standard working heights currently range between 34 in and 36 in (86 cm and 92 cm).

2. Cutting the Countertop

Once the base cabinets are level and secured to one another, the countertop (typically 1-1/8 in or 1-1/2 in / 28 mm or 38 mm thick) is set in place. Cutouts for the sink and cooktop must be made using a jigsaw. Important: The raw edges of the particle board exposed after sawing must be sealed with waterproof silicone; otherwise, moisture penetration will cause the countertop to swell.

3. Hinges and Cabinet Doors

Cabinet doors attach to carcasses usingconcealed cup hinges. Standard kitchen doors utilize concealed European hinges with a 1-3/8 in (35 mm) cup diameter and a typical 110° opening angle. For standard doors resting over the front edge of the side panel, afull overlay hingeis used. A key advantage of modern cup hinges is 3D adjustability. Three adjustment screws on the hinge arm allow post-installation fine-tuning in height, depth (gap relative to cabinet frame), and side-to-side alignment down to the millimeter, ensuring uniform reveal lines across all doors in the71 in (180 cm) kitchenette.

Materials and Finishes

Material choices dictate both the durability and appearance of your71 in (180 cm) single-unit kitchen. Melamine resin surfaces are scratch-resistant, water-repellent, and easy to clean.

Two key aesthetic trends currently dominate kitchen finishes:

  • Wood Grain Finishes:Woodgrain finishes like Wotan Oak or Sonoma Oak bring warmth to the room. Awood kitchenetteis also more forgiving of minor smudges than solid colors. Today's wood grains feature deep embossing for a natural tactile feel.
  • Matte and Dark Tones:Agray kitchenetteor dark anthracite and matte white doors reflect the trend towardmodern kitchenettes. They offer clean architectural lines and pair exceptionally well with concrete-look countertops.

Featured Products for Compact Kitchen Projects

If you are looking for a compact solution or want to build a modular kitchen layout, our GONZO series offers versatile base configurations. At 79 in (200 cm), these models are slightly wider, showcasing the classic layout and hardware quality of compact kitchen blocks:

Frequently Asked Questions (FAQ) About 71 in (180 cm) Kitchenettes

Can a 71 in (180 cm) kitchenette be expanded later?

Yes, modular kitchenettes can be expanded effortlessly. If you move into a larger home later on, you canexpand your kitchenetteby adding extra 16 in or 24 in (40 cm or 60 cm) base cabinets, apull-out pantry cabinet, or freestanding tall cabinets. The main requirement is that the door finish (e.g., Wotan Oak) remains available from the manufacturer. You will often simply need a new, longer countertop to join the cabinet modules seamlessly.

How much space is needed for utility connections behind the kitchen?

Base cabinets are typically 18 in to 20 in (45 cm to 50 cm) deep, whereas countertops measure 24 in (60 cm). This leaves roughly 4 in to 6 in (10 cm to 15 cm) of rear clearance to the wall. This space is plenty for routing 2 in (50 mm) drain pipes, hot and cold flexible water supply lines, and power cables for the range.

What tools are required for assembly?

To assemble a71 in (180 cm) wide kitchen, you will need a cordless drill/driver with Torx and Pozidriv bits, a rubber mallet (for setting wood dowels), a level (at least 32 in / 80 cm long) for adjusting cabinet feet, a tape measure, and a jigsaw equipped with a fine-toothed wood blade for countertop sink and cooktop cutouts. Installing upper wall cabinets will also require a hammer drill and wall anchors.

What is the difference between a mini kitchenette and a 71 in (180 cm) studio kitchen?

These terms are often used interchangeably. However, a mini kitchen (or pantry kitchen) sometimes refers to even smaller, single-unit structures (39 in to 47 in / 100 cm to 120 cm) featuring a seamless stainless steel top with integrated sink and electric burners. A71 in (180 cm) studio kitchen, by contrast, consists of full-size individual cabinet modules topped with a wood composite countertop ready for drop-in appliances, offering substantially more prep space.

Related Categories for Your Kitchen Project

If 71 inches (1.80 meters) is not quite the right fit for your layout or you are searching for larger modules, explore our catalog for additional standard DIY layout widths. If you have extra space, check out our79 in (200 cm) kitchenetteor83 in (210 cm) kitchenetteoptions. For larger rooms and family households, a102 in (260 cm) kitchenetteoffers plenty of room for extra deep-drawer cabinets and expanded counter space.