Discount DE

189 products

Related categories

The Discount US category brings together essential furniture hardware, drawer slide systems, and hinges for functional furniture construction and repair at discounted rates.Anyone looking for afurniture discount onlineto cost-effectively build or upgrade cabinets, dressers, or sideboards will find the necessary technical components right here. While a traditionalfurniture discountertypically sells finished furniture pieces, our focus is explicitly on mechanical components for DIYers and professional installers. Instead of searching for adiscount furniture store near methat often carries poorly stocked spare parts, this selection provides direct access to specific hardware required for repairs or DIY projects using materials likeparticle board,MDF, orsolid wood.

What You Will Find in the Discount US Section

This product range covers the fundamental motion mechanisms used in cabinetmaking and furniture building. The selection ranges from basic drawer slides to complex, multi-dimensionally adjustable hinges. Anyone wanting to repairdiscount furnitureor execute custom DIY projects relies on dependable mechanical hardware.

Drawer Slides and Extension Systems

The slide mechanism is the heart of every dresser and desk. Here, a primary distinction is made betweenfull-extensionandpartial-extension slides. A full-extension slide allows the drawer to extend 100% out of the cabinet body, making access to the rear area significantly easier. A partial-extension slide, by design, releases the drawer to only about 75% of its length.

For standard residential applications, models like theFull Extension Drawer Slides 19-11/16 in (500 mm) - H45 (1 Set)are ideal. The designation H45 stands for a profile height of1-3/4 in (45 mm), which is a standard dimension for ball-bearing telescopic slides. For shallower drawers, such as those in desks, low-profile systems are frequently used, such as the1 Set Ball Bearing Drawer Slides, H27or the highly compactPartial Extension Drawer Slides 9-11/16 in (246 mm) - H17 (1 Set).

Alongside ball-bearing slides, classicroller slidesremain a dependable option. These operate on a plastic-coated rail running over nylon rollers. They are mechanically simpler, robust, and often installed in lighter furniture. A typical example is theRoller Drawer Slides White - 15-3/4 in (400 mm).

For concealed designs where the hardware mechanism needs to run invisibly beneath the drawer bottom,undermount slidesare used, such as the1 Set Soft-Close Undermount Drawer Slides.

Concealed Euro Hinges and Cabinet Hinges

Theconcealed hinge(often called a cup hinge or Euro hinge) is the industry standard in modern cabinetmaking. The name comes from the cylindrical cup that is mortised into the cabinet door. The standard bore dimension for the hinge cup is1-3/8 in (35 mm). Choosing the right hinge depends entirely on the door overlay configuration:

For specialized layouts incorporating internal pull-out drawers or requiring wide access, wide-angle hinges are utilized, such as the165° 3D Soft-Close Concealed Hinge, H2 Mounting Plate with EURO Screws, Full Overlay.

Gas Struts and Flap Stays

For upward-opening lift-up doors on kitchen wall cabinets or living room storage units, gas struts (gas springs) are essential. They hold the cabinet door safely in the open position and assist during the upward motion. The lifting force of these struts is measured inNewtons (N). The selection spans from lightweight models like theGas Strut Black 9-13/16 in (250 mm) - 60Nfor small MDF doors up to high-capacity options like theLIFT-O-MAT Gas Strut - 250Nfor heavy solid wood fronts. As an alternative to pneumatic systems, mechanical flap stays are also available, such as theMechanical Flap Stay PM04, Nickel.

Technical Features: Soft-Close and Push-to-Open

In modern furniture hardware, two convenience mechanisms have established themselves. They follow entirely different mechanical principles and must be precisely evaluated during project planning.

Soft-close dampingdampens the door or drawer during the final inches of movement, pulling it gently and silently into its closed position. This reduces wear and tear on materials and eliminates loud slamming. Many cabinet hinges feature integrated soft-close mechanisms right in the hinge arm, like the4D 110° Soft-Close Hinge, H0 Concealed Mounting Plate with EURO Screws and Covers, Full Overlay. On drawer slides, an integrated hydraulic cylinder delivers this effect, as seen on theSoft-Close Drawer Slides 21-5/8 in (550 mm) - H45 (1 Set).

Thepush-to-open mechanism(also referred to as touch-release) works in the opposite way. It enables handle-free cabinet fronts. A light touch on the front triggers an internal spring mechanism that pops the door or drawer open slightly. A prime example is thePush to Open Drawer Slides 13-3/4 in (350 mm) - H45 (1 Set).

High-performance advanced hardware combines both functionality types. In these dual systems, the spring releases the handleless front, while a dampener engages during manual closing for the last few inches. This combination is found in hardware like thePush-to-Open + Soft-Close Ball Bearing Drawer Slides, 17-11/16 in (450 mm) - H45.

Selection Criteria for DIYers and Builders

If you want to upgradecheap discount furniturewith heavier-duty, reliable hardware, accurate measuring prior to installation is essential.

Calculating Drawer Slide Dimensions

The length of the slide must match both cabinet depth and drawer side depth. Standard lengths typically range from9-13/16 in to 31-1/2 in (250 mm - 800 mm). The slide should always be slightly shorter than the internal cabinet depth clearance. For extra-deep structures, such as under-stair storage or workshop cabinets, heavy-duty slides are required, such as theFull Extension Drawer Slides 43-5/16 in (1100 mm) - H53 (1 Set)or the heavy-dutyFull Extension Heavy Duty Drawer Slides 59-1/16 in (1500 mm) - H53 (1 Set). The H53 profile height indicates significantly higher load capacity and torsional rigidity compared to standard H45 profiles.

Furthermore, side clearance (the gap between the drawer side box and the inner cabinet wall) must be maintained. For standard side-mount ball-bearing slides, this clearance is typically1/2 in (12.7 mm)per side.

Sizing Gas Struts

Selecting the correct rating in Newtons is critical. If a strut is too weak, the flap will drop closed; if it is too strong, closing the cabinet door requires excessive force or risks tearing hardware out ofparticle boardpanels. Required force depends on front door weight (including handles) and door height. AGas Strut Silver 9-13/16 in (250 mm) - 100Nsupports approximately22 lbs (10 kg)depending on leverage geometry and precise mounting pivot points.

Tools and Installation

Furniture hardware functions like a car's transmission: if the mechanical gears do not align perfectly, movement binds—no matter how flawless the exterior finish looks. Precise mounting requires standard, specialized workshop tools.

  • Acordless drill/driverwith matching bits. Forwood screwsandparticle board screws, aPZ2 (Pozidriv #2)bit is generally required.
  • A1-3/8 in (35 mm) Forstner bitis mandatory for drilling hinge cup mortises into the cabinet door. Boring depth typically measures7/16 in to 1/2 in (11.5 mm to 12.5 mm).
  • Afolding ruleror tape measure alongside a combination square ensures precise right-angle alignment for slide rails.

Installing concealed Euro hinges relies on across-mounting plate. Many hinges featured here come equipped withEURO screws. These specialized fasteners feature a thick shank diameter (typically3/16 in (5 mm)) designed to grip directly into pre-drilled holes following the standardSystem 32(an industry-standard 32 mm line-boring pattern with precise center-to-center hole spacing of1-1/4 in (32 mm)).

When adjusting cabinet doors, modern 3D adjustable hinges like the3D 110° Soft-Close Hinge, H0 Mounting Plate, Full Overlay Doorsprovide full three-way adjustability:

  1. Height Adjustment:Via slotted holes on the mounting plate (typically +/- 1/16 in (+/- 2 mm)).
  2. Depth Adjustment:Sets the clearance gap between door back and cabinet face frame/body.
  3. Side-to-Side Adjustment:Aligns reveal gaps parallel across multiple adjacent cabinet doors.

Applications in Cabinetry and Furniture Construction

Hardware components in the Discount US category are used across all types of interior cabinetry and custom woodworking projects.

In kitchen cabinetry, full-extension soft-close slides are predominantly installed, such as theFull Extension Drawer Slides 17-11/16 in (450 mm) - H45 (1 Set), providing total access to deep pots, pans, and heavy cookware. Soft-close damping protects delicate contents from impact.

In modern living room designs where handleless sideboards are popular, builders turn to push-to-open mechanisms. For heavy media console drawers, options like thePush-to-Open + Soft-Close Ball Bearing Drawer Slides, 19-11/16 in (500 mm) - H45are an ideal choice.

In bedroom wardrobe construction, internal pull-out drawers are frequently installed. To ensure internal drawers clear open wardrobe doors without catching, wide-opening angles are required. Here, 155° or 165° wide-angle hinges are necessary.

FAQ – Frequently Asked Questions About Cabinet Hardware

What is the difference between roller slides and ball-bearing slides?

A roller slide runs on nylon wheels along painted steel tracks and usually offers only partial extension. It is forgiving during installation but has lower weight capacities. A ball-bearing slide (telescopic slide) utilizes hardened steel ball bearings held in a metal cage. It offers smoother travel, enables full extension, and supports significantly higher load ratings.

How do I know whether I need full overlay, half overlay, or inset hinges?

Look at the cabinet from the front while the door is closed. Can you see the front edge of the cabinet side panel wall beside the door edge? If yes, the door sits inside the frame, and you needinset hinges. If the door completely covers the front edge of the side panel wall, you requirefull overlay hinges.

Can I retrofit a standard drawer with soft-close slides?

Yes, provided existing slides can be removed. You must measure side clearance (the space between the drawer side box and the cabinet interior wall). If this measures approximately1/2 in (12.7 mm), you can swap out old drawer slides with soft-close models, like theSoft-Close Drawer Slides 21-5/8 in (550 mm) - H45 (1 Set).

What do the designations H45 and H53 mean on drawer slides?

This number indicates the physical profile height of the metal slide rail in millimeters. H45 (1-3/4 in (45 mm)) is standard for residential home furniture. H53 (2-1/16 in (53 mm)) is taller, more rigid, and engineered for heavy-duty slides rated to support loads of 110 lbs (50 kg) or more.

How do I replace a faulty gas strut?

Check the printed specifications on the old strut cylinder. You will find a rating printed in Newtons (e.g., 120N). Order a direct replacement matching that exact force output, such as theGas Strut Silver 9-13/16 in (250 mm) - 120N. Installation generally requires no heavy tools—simply pry back the small metal retaining clip on each ball socket head.

Why won't my cabinet door close completely with a soft-close hinge?

The hinge depth adjustment screw is often set too tight, pulling the door too close to the face frame or cabinet wall so that the door rubs against wood before the soft-close dampener completes its travel distance. Adjust the depth screw on the hinge arm to widen the gap between door and cabinet body to roughly1/16 in (1.5 mm to 2 mm).

Are push-to-open and self-closing drawer slides the same thing?

No, they serve opposite functions. Self-closing mechanisms (frequently paired with soft-close) pull the drawer closed. Push-to-open mechanisms spring the drawer open when pressed. However, specialized hybrid slide hardware combines both functionalities into a single mechanism.