Furniture Accessories

Furniture accessories cover all the functional hardware, connectors, organizing systems and handles needed to build, repair and update case furniture and built-ins, and to use them comfortably. Only the right components turn cut-to-size engineered wood panels into a sturdy piece of furniture, one that closes quietly in daily use, swings open with precision and puts every last corner of the available space to use. In modular furniture building, these mechanical parts work like the joints and tendons of a body: they carry loads, guide movement and keep cabinets permanently square.

Functional hardware for doors, flaps and fronts

How a cabinet front opens and closes largely determines everyday convenience. Modern furniture building is dominated by concealed hinge systems and spring-assisted lift mechanisms, which must be matched exactly to the geometry of the cabinet.

Cabinet hinges and cup hinges

Classic cup hinges are the technical standard for hinged doors. In particleboard or MDF cabinets, the hinge cup sits in a pre-drilled 35 mm (1-3/8 inch) bore of standard depth. Depending on where the door sits relative to the outer side panel, different hinge arm offsets (cranks) are used:

• Full overlay (door in front of the cabinet): The front covers the front edge of the cabinet almost completely. A typical choice is the 110° Soft-Close hinge with H0 mounting plate, whose integrated dampers close the door gently.
• Half overlay (twin doors): Two doors share one center panel, so each front covers only half of the panel edge. The 110° Soft-Close hinge for center-panel mounting handles this.
• Inset (flush inside): The door sits flush with the outer edge of the cabinet, which is what the 110° Soft-Close hinge for inset mounting is designed for.

For cabinets with interior drawers or a wide access angle, wide-angle hinges such as the 165° 3D Soft-Close hinge let the door swing fully out of the way without restricting the clear cabinet width. For corner cabinets with angled face panels, specialty hinges such as the +45º hinge with H2 mounting plate guide the door stably at a 45° angle.

Lift systems and motion damping

Wall cabinets that open upward need specialized lift systems that hold fronts securely in any position or swing them up with damping. To retrofit existing hinged doors, or as stop protection, use separate door dampers and elastic bumpers & dampers, which reliably stop hard impact noise against the cabinet edges.

Storage solutions and interior fittings for kitchen and living areas

Without functional interior fittings, the clear depth and height of a cabinet often go unused. Dedicated pull-out systems turn deep recesses into organized, easy-to-survey storage.

Narrow base cabinet pull-outs

In kitchen runs, usable gaps often appear between standard cabinets. Pull-out storage sized to fit makes these niches accessible:

• 150 mm (5-7/8 inch) cabinet width: A narrow side pull-out such as the 15 cm pull-out pantry with 3 shelves makes ideal use of a 150 mm cabinet width at 450 mm (17-11/16 inch) depth for spices and oils.
• 200 mm (7-7/8 inch) cabinet width: The 20 cm chrome pull-out pantry offers plenty of room on 3 levels, with a 155 mm (6-1/8 inch) basket width and 505 mm (19-7/8 inch) height.
• 300 mm (11-13/16 inch) cabinet width: For larger supplies, the 30 cm Soft-Close side pull-out is a good fit, with a 230 mm (9-1/16 inch) basket width and damped self-closing.

Organization for wall cabinets, wardrobes and drawers

In kitchen wall cabinets above the sink, an aluminum dish rack for wall cabinets lets dishes drain directly; in a 600 mm (23-5/8 inch) wide cabinet, a rack 564 mm (22-3/16 inch) long with a variable width of 275 mm to 325 mm (10-13/16 to 12-13/16 inch) bridges the dimensional tolerances of the side panels. In the bedroom, well-structured wardrobe accessories keep clothes wrinkle-free, while thoughtful drawer equipment sorts cutlery, small parts and kitchen utensils neatly and keeps them from sliding around. Built-in waste bins and trash containers under the sink also make sorting recyclables easier right at the work surface.

Furniture handles, feet and support hardware

The feel and stance of a piece of furniture shape how high-quality it seems in daily use. Alongside mechanical properties, ergonomic dimensions play a central role.

Bar pulls and furniture handles

For safe handling of heavy pull-outs and wide fronts, furniture handles come in standardized hole spacings. High-quality nickel-plated steel bar pulls with M4 screw mounting cover the usual standard sizes:

• Hole spacing 96 mm (3-3/4 inch): overall length 150 mm (5-7/8 inch), projection 32 mm (1-1/4 inch)
• Hole spacing 128 mm (5-1/16 inch): overall length 200 mm (7-7/8 inch), projection 32 mm (1-1/4 inch)
• Hole spacing 160 mm (6-5/16 inch): overall length 250 mm (9-13/16 inch), projection 32 mm (1-1/4 inch)
• Hole spacing 192 mm (7-9/16 inch): overall length 300 mm (11-13/16 inch), projection 32 mm (1-1/4 inch)
• Hole spacing 256 mm (10-1/16 inch): overall length 400 mm (15-3/4 inch), projection 32 mm (1-1/4 inch)

Furniture feet and wall mounting

Height-adjustable furniture feet with standard M8 or M10 threads compensate precisely for uneven floors and keep wooden cabinets clear of floor moisture. For floating shelves, wall boards or coat rack panels, sturdy shelf supports & brackets and attractive coat hooks hold securely under point loads.

Joining hardware, countertop installation and desk organization

The structural integrity of case furniture depends on hidden connectors and the right fasteners.

Cabinet connectors and screws

Knockdown cabinets are normally assembled with cam connectors, whose Rastex or Minifix housings sit in a 15 mm (19/32 inch) bore. Combined with sturdy wood dowels, furniture connectors keep the side panels square to the top and bottom panels. Specialized wood screws and furniture screws, with thread geometries matched to particleboard and solid wood, are used to fasten hardware, mounting plates and drawer slides in System 32 (rows of holes spaced 32 mm apart).

Countertops, security and cable management

When installing kitchen runs, heavy-duty countertop connectors draw the panel joints together tightly and keep moisture out of the seams. In commercial settings or the home office, mechanical furniture locks protect confidential documents from unauthorized access. Finally, precisely fitting cable grommets keep cable routing clean at desks and media furniture, guiding cable bundles neatly through holes in the panel.

Practical guide: selecting and installing furniture accessories

For a successful DIY installation or retrofit, check the following technical criteria in advance:

1. Drilling pattern and cabinet dimensions: Check any existing rows of holes (e.g., System 32) and measure the clear cabinet width, depth and height exactly in millimeters before choosing hardware.
2. Determine the overlay type: For hinged doors, clearly distinguish between full overlay, half overlay and inset mounting to choose the right hinge arm offset.
3. Mounting plate height: Choose the mounting plate distance (e.g., H0 for standard overlay or H2 for specific cabinet spacing) to set the door gaps exactly with the 3D adjustment.
4. Tools ready: Have screwdrivers with the matching bit profile (PH, PZ or TX), a 35 mm (1-3/8 inch) Forstner bit for cup hinges and a level on hand.

Overview of related accessory and hardware categories

In addition to the individual system components, the following specialty categories offer the right parts for your furniture-building project:

• Cup hinges & cabinet hinges: For precise mounting of overlay, inset or angled cabinet doors, with and without Soft-Close damping.
• Furniture handles & knobs: For individual visual upgrades and ergonomic operation of drawers and furniture fronts.
• Furniture feet: For leveling uneven floors and for a stable stance under all kinds of case furniture.
• Furniture connectors: For positive-locking, stable and, if needed, detachable cabinet constructions.
• Base cabinet storage: For optimal use of kitchen niches from 150 mm (5-7/8 inch) wide.
• Dish racks for wall cabinets: For space-saving dish drying directly in the wall cabinet above the sink.
• Cable grommets: For orderly, chafe-proof cable organization at work desks and office tables.